|
| I had a gas tank on an old grain truck start leaking at the seam several years ago. I tried JB WEld on it but never had any luck as gas would seep thru it before it had a chance to settup. I got some special gas tank repair putty at the local auto parts store that is made to seal tanks that still have gas in them without having to drain the tank. . I believe it was made by FastWeld. That was probably 15 years ago & it's still holding.
I have also repaired gas tanks by soldering them using a iron that you heat with a torch then use the iron to do the soldering.
Edited by boog 9/5/2008 19:04
| |
|