Alberta, Canada | I make lots of small squares and there is a big industry of export hay in sm. squares in Alberta. The method "here" for large volumes of squares is using NH self propelled stackers for picking them in a timely manner. For loading trucks a bale head on a loader that picks up a full tier off the stack of 18 bales on a tractor or some use zoom booms which are handy for van trailers/containers. You can do lots with on of them baleheads as for sorting hay and restacking the stacks. I have a friend who bought one so just he could utilize some lower hay sheds he couldn't stack in with his nh balewagon. Plus you can loader trailers, some bale heads are made to spin 180 to load from teh side of the trailer.
Not sure where your market is or if you do enough volume yet but adding a retriever truck is another handy tool as again here everyone ones it delivered. I also use the retrierver truck to bring stacks into the sheds from distant fields as roading with the NH balewagon takes too much time. Espeically when you're dodging thunder storms!
Below a truck is moving hay from field to sheds or sometimes directly to stables.
Next pic is the bale head on the tractor. Now that tractor is a bit small or I guess the loader is a bit small/light as it doesn't quite lift high enough on some stacks. It works and we've used it alot but I'd like a higher lift loader. Better would be say a 100hp tractor with a decent sized loader.
Edited by Larry in AB 4/3/2015 11:05
(IMG_0253.JPG)
(bale head.jpg)
Attachments ----------------
IMG_0253.JPG (109KB - 566 downloads)
bale head.jpg (131KB - 578 downloads)
|