|
| A little background info before my thoughts...
2013- we put up ~2500 squares with 1 baler using a 10 bale push type accumulator in front of a skid steer and a grapple on skid steer to load/unload trailers. This worked ok, but the time spent accumulating/stacking/unloading really limited our productivity.
2014- Upgraded to a late model baler, added Kuhns 1036F (10 bale) accumulator, and added a 510F tie grabber. Also added some part time labor. We put the tie grabber on a loader tractor and stacked in the field and used the skid steer to unload at the barn. This system worked WAY better than the previous, the most our 3 man crew was able to put up was 2300/day and ended up with ~15,000 bales made in 2014.
2015- For I have added another baler/1534 Kuhns, traded the 1036F for a 1534, and a few other misc. things. We are planning on making around 25k-30k bales in 2015 and would like to see 4k-5k bales/day with a 4 man crew.
I'm not sure what your weather patterns are like up there, but we can have very short windows for putting up dry hay and reasonably long windows depending on the year. In short, less time demands more machinery.
My thoughts on it are, if we add a third baler (45k-50k bales) that will about be the tipping point between accumulators and bundlers. The amount of $ in the accumulator system will be similar to the bundlers, but more operators needed. But, I would be seriously considering going to big squares at that point too. | |
|