AgTalk Home
AgTalk Home
Search Forums | Classifieds (45) | Skins | Language
You are logged in as a guest. ( logon | register )

Bale baron or hay accumulators and grapples?
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
twraska
Posted 4/2/2015 22:48 (#4493190 - in reply to #4493035)
Subject: RE: Bale baron or hay accumulators and grapples?


Wallis, TX

We had a Steffen system, sold it and said if we ever wanted to get into the small square market again, we'd to the Bale Baron.  We did bale some for a guy who came in with his Baron and bundled up our bales for us.

Steffen is cheaper, you can stack and unstack but is slow and the end user (feed store) can't benefit from it unless they have a grapple.

Bale Baron is EXPEN$IVE but the feed store can use a forklift to move the 21  bale stacks.  Sometimes you can sell hay just on this point.

Cons, either one, the bales must be consistent in size or you'll have a jam up.  Baron will either jam or cut the end off the long bale then you have a busted bale in the bundle.  Hard to get heavy bales in the Baron as they can't be longer than 36" (about 32" string to string), we did have some customers complain about light bales.  And these are 'horse' customers who rarely complain about light bales.  We had the Steffen behind the baler and you had to slow the baler down to get the 'perfect' bales for it.  Same was true for the Baron but it was being pulled by a separate tractor so if the baler busted a bale he just went around it.  When the machine is pulled by the baler and the baler misses a tie, you have two problems to fix.  The baler and the subsequent choke up in the accumulator.

In short, either one will pay for themselves thru labor savings but there are hidden costs in owning one.

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)