|
Morris, IL | Yes i've seen them as well, they were home made with a roll pin in a hydraulic fitting. Leaked real bad and was something coop put together. But we removed them and dealer gave us a couple of "control valves" CIH called them. Should double check but i believe this CIH part number is what you want Von. 25405013 I know they are orifices, I'm only 75% they are the one way time control valves. But ask JD or CIH or whoever for a floating orifice and they should be able to find you one.
Von being you are only powering up i wonder if you put orifice right in the system if that wouldn't take care of the problem? When it's free falling down i'm just not sure an orifice in the line would affect down that much but i could be way off. I'm surprised you have markers that only work with one way power, we have to power up and power down with ours. But i know what you mean about 7200 markers, we never found a fix for them, go down great and one side comes up better but one marker i just can't slow it down enough to make me happy. But we've went to GPS and i probably dropped them half a dozen times in last 2 years.
Edited by NEILFarmer 4/2/2015 20:06
| |
|
Does such a hyd fitting exist for planter markers
