|
Ionia Co. Michigan | In your last pic it appears some of the bushings are still original as there is still red paint on them and the bolts. 1000 hours is the max on the bushings or problems will start as you have now. Adhere to the 1000 rebush time frame and the shaker will be happy. Replace all bearings on the hex shaft at that time also including the banjos and especially the one behind right hand drive pulley. That one went out on mine and took out other things until I found it. The right hand banjo is fun to get out but is not impossible. I replaced 3 or so bushings to get finished but over the next summer I replaced the entire set of bushings and have had 2 harvests since and no problems. The hammering of the bad bearing ended out tearing apart the washboard part at the front too. | |
|
Case 2388 Shaker Repair
