|
| I've tried the service switch in both positions. Still cant get power to the solenoid. I checked all fuses twice with a test light. The only thing I cant figure out is wether there is suppose to be another fuse in the panel in the cab. It shows a 5amp with a bucked and lock next to it but there is only a 7.5 on that side when the diagram shows two a 7.5 and a 5. I feel like it should be something simple as it was working fine and got out and got back in and it wouldn't work. But iv double checked everything that I can see. It starts runs and moves and wont start when the seatbelt isnt buckled or your not in the seat. Seems both switches are working properly. All fuses check out. Maybe a faulty EIC but no way to really check that. Cant even think of another skid steer in the area to swap one with just to try. | |
|
LS160 skid steer help
