|
Dearfield Co. | One thing you need to keep in mind is how wilson is constructed with the one piece skin on the out side-------more than likely it has a hole on the inside skin or it got spray from the tires behind one of the corrosion plates they put in the trailer to trap the crap that causes this. If the skin is like this more than likely the long members are full of rust as well as the cross beams in the nose. That trailer is out of service here in CO. and would end up costing more than its worth in repairs. I don't care for wilsons parts network because out side skin in pieces over a ft by a ft can sometimes need to wait on new cattle trailers to come so they can ship it inside .
should add take a shop mirror and look thru the small holes on the bottom of the rail if its a later trailer that has them along the length of the trailer with a light and a shop mirror and I would guess you will find more in the sides---------
don't know how the double post happened power fluctuated and must of sent it
Edited by a4t-1600 1/18/2015 19:40
| |
|
|
Wilson trailer corrosion repair, how serious?
