|
| The 1060 has over-center fold, there are latches to keep the outer wings tight against the inner when it goes over center. The 1060 also had a little stouter hinge and the mount for the outer wing fold cylinder on the smaller ones was a little better, as it was longer for more leverage. I think the 1060 also had a larger beam for the hitch. I had a 48' and added a 4th bar and spaced things out. It helped, but still not a trash eater. Also, late model 1050's use the same 47 degree sweeps as the 1060. You are right about the shanks, anything of that age is probably shot unless it had the shank protectors. My 1060 lost (broke) a couple where the shank was worn just above the sweep. | |
|
JD 1010 field cultivator
