|
w-c wi | What we did was take 8" pvc pipe or what a 6" square post fits in. Drill hole 4' deep and poured concrete around it and level or 1" above with top of ground, drop 6" post in the hole and we capped the top with metal top and 2 " inches down the side lag screw it and used 2 turnbuckle's, welded the one end to cap on back side of cap so u have more of angle, pull pole out when doors r open and nothing to drive over, if it ever fills with dirt we just vac'ed it out once now in 5 years, just make sure your centered | |
|
pole barn split slider doors
