AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

John Deere 4020 hydraulic problem
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
ronm
Posted 12/22/2014 22:17 (#4258891 - in reply to #4258599)
Subject: RE: John Deere 4020 hydraulic problem


Fruita CO
It shouldn't do that in the time it takes to shift gears-all syncro's will do that, the trans pump stops when the clutch is disengaged. If it quits that soon, you have:
1-trans pump is worn out.
2-A line or o-ring is blown off the pump, or other leak in the low-pressure circuit.
3-High-pressure leak to sump in steering, brakes, rockshaft or SCV. If it's a side console tractor it can be in the PTO valve.
4-Plate on the bottom of the rockshaft housing is cracked or loose.
5-possibly an internal leak in the main pump, but not likely.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)