AgTalk Home
AgTalk Home
Search Forums | Classifieds (3) | Skins | Language
You are logged in as a guest. ( logon | register )

Setting up planter for variable rate liquid, pwm or 12v controller?
View previous thread :: View next thread
   Forums List -> AgTalk CafeMessage format
 
Kickapoogian
Posted 11/28/2014 10:24 (#4206756 - in reply to #4206354)
Subject: RE: Setting up planter for variable rate liquid, pwm or 12v controller?



Soldiers Grove Wi. 54655
How does the liquid fert compare in price to dry?
I have liquid on my JD 7000 with the 3 tanks but only filled them with water last year to see if I could get a little more down pressure.. I know the blue squeeze pump is shot on my machine and figure on putting just a couple gallons of starter on this next year and spreading the rest but the problem I ran into on the sidehill was the water would all flow to the bottom or lower tank thus the drive wheels wouldn't drive that were on the upper side.. Of course my problem was I didn't fill them all the way to the top but this is telling me after I get started and the liquid fert would go down I'd have the same problem... I'm thinking I'd be best to put an electric pump on each tank to even it out so the flow back and forth wouldn't be a problem.. Anyone else deal with this problem or do I have the solution figured out?
Thanks
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)