Viewing a thread - Welding guard on rim to protect valve stem

You are logged in as a guest. ( logon | register )

Welding guard on rim to protect valve stem	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Beans

Posted 10/13/2014 19:12 (#4124346 - in reply to #4124285)
Subject: RE: Welding guard on rim to protect valve stem

N.E. North Dakota

My 9600 was on the inside and I did break it off 1 time but it was kinda my fault. Went through some mud then put it in the shop, next morning left it outside for a while and the mud froze. As soon as I was loaded up it took the valve stem out. Wettest part of the field and 15 degrees, tire man was not very happy with me.

Welding guard on rim to protect valve stem - Teeshirtfarmer : 10/13/2014 17:52
- RE: Welding guard on rim to protect valve stem - JAS#17 : 10/13/2014 17:56
  - RE: Welding guard on rim to protect valve stem - bulldozerbert : 10/13/2014 18:10
- RE: Welding guard on rim to protect valve stem - John..neAR : 10/13/2014 17:57
- RE: Welding guard on rim to protect valve stem - 4WD : 10/13/2014 17:58
- RE: Welding guard on rim to protect valve stem - Von WC Ohio : 10/13/2014 18:03
- RE: Welding guard on rim to protect valve stem - JPT : 10/13/2014 18:04
  - RE: Welding guard on rim to protect valve stem - GinNB : 10/13/2014 20:20
- RE: Welding guard on rim to protect valve stem - Thud : 10/13/2014 18:06
  - RE: Welding guard on rim to protect valve stem - 63E : 10/13/2014 18:17
    - RE: Welding guard on rim to protect valve stem - Drilldo : 10/13/2014 18:23
    - RE: Welding guard on rim to protect valve stem - Chancho Farms : 10/13/2014 20:06
      - RE: Welding guard on rim to protect valve stem - Dave Seck : 10/13/2014 21:50
        
        RE: Welding guard on rim to protect valve stem - Von WC Ohio : 10/13/2014 21:54
        RE: Welding guard on rim to protect valve stem - ronm : 10/14/2014 09:05
        
        RE: Welding guard on rim to protect valve stem - krantz : 10/14/2014 14:27
        
        RE: Welding guard on rim to protect valve stem - ronm : 10/14/2014 15:15
        
        RE: Welding guard on rim to protect valve stem - Dave Seck : 10/14/2014 21:56
        
        RE: Welding guard on rim to protect valve stem - pete37921x : 10/14/2014 22:20
        RE: Welding guard on rim to protect valve stem - ronm : 10/15/2014 08:50
        
        RE: Welding guard on rim to protect valve stem - Dave Seck : 10/15/2014 09:36
        
        RE: Welding guard on rim to protect valve stem - pete37921x : 10/15/2014 10:03
        RE: Welding guard on rim to protect valve stem - ronm : 10/15/2014 14:52
  - RE: Welding guard on rim to protect valve stem - krantz : 10/13/2014 18:43
- RE: Welding guard on rim to protect valve stem - Dave Seck : 10/13/2014 18:16
  - good way to die - dvswia : 10/14/2014 07:07
    - RE: good way to die - Dave Seck : 10/14/2014 10:06
      - RE: good way to die - ronm : 10/14/2014 10:36
- RE: Welding guard on rim to protect valve stem - Deere9986 : 10/13/2014 18:35
- RE: Welding guard on rim to protect valve stem - Teeshirtfarmer : 10/13/2014 18:47
  - RE: Welding guard on rim to protect valve stem - Lone Wolf Picker : 10/13/2014 19:05
  - RE: Welding guard on rim to protect valve stem - Beans : 10/13/2014 19:12
    - RE: Welding guard on rim to protect valve stem - Teeshirtfarmer : 10/13/2014 19:39
- RE: Welding guard on rim to protect valve stem - D6Joe : 10/13/2014 20:00
- RE: Welding guard on rim to protect valve stem - BHTN : 10/13/2014 20:26

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)