|
Morris, IL | The 2x4 has a hole near the top that is perfectly centered. I put a 1/2" socket extension through it into the gear case plug. That perfectly centers it between the rolls at the rear. The under side of the 2x4 i put few spacers, one is 1 1/8" and bottom is 1" or so. So my deck plates are 1" at the front and 1 1/8" at the rear. I have to manually eye center the front, it works really good. I'm not sure who's idea that was but i got it off agtalk somewhere at some point. | |
|
JD 643 Corn Head Rebuild Pics
