|
| Ok, here is what I have so far. Coming off the chassis, I have a Green, White, White -GND, Red, Red/White striped, Brown, and Yellow Wires.
Green - Works the right signal and brake. (If I hook the red wire from the tail lights I can get both right and left lights to work when applying the brake. But also the left and right sides will flash when giving a right turn signal.)
White - Works the left signal
White GND- not hooked up
Red- nothing
Red/White - nothing
Brown - tail/marker lights
Yellow- Nothing.
Should the WHITE be working both the Left signal and Brake?
| |
|
Truck brake light wiring
