|
| The problem SFO describes is what was remedied by Deere's "drop kit" to lower the rockshaft in relation to the frame. The kit is no longer available as a kit, but all the parts are available individually. You can accomplish something similar by turning the rockshaft hangers upside down. It was the first couple years the 1850s were built that have the problem, although I'm not entirely sure that it was corrected by '97. You can determine if it has been corrected by looking at the rockshaft in relation to the frame -- This pic shows a drill that needs to have the rockshaft lowered: http://exapta.com/knowledge/images/tip_drill.gif | |
|