AgTalk Home
AgTalk Home
Search Forums | Classifieds (200) | Skins | Language
You are logged in as a guest. ( logon | register )

How to wire convenience outlet on JD 4430?
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
KTM300
Posted 7/1/2014 19:09 (#3946831 - in reply to #3935687)
Subject: RE: How to wire convenience outlet on JD 4430?


Montana
Dickefarms - 6/24/2014 17:41

Go off battery with two 12 gauge wires, put a 25 amp fuse within 6 inches of where you attach the wire to the battery. Under the dash split the hot wire into two wires and for the switched wire use a car alarm relay(any auto part store should have one). On the left side of the dash there should be a circuit breaker box, tie into the switched side to run the coil on the relay. You want the power going the outlet to be as direct as possible because the baler cannot have very much voltage drop.


Thanks for the great replies.

Is it necessary to run the switched wire to the battery as well? Does the monitor pull high amperage off the switched terminal?
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)