|
| Couple other things to remember...and watch out for. if you open the gate before it trips, the arms will cycle. Like when you are sitting in the driveway doing maintainance. Make sure they finish their cycle before you close the gate or they will stop where they are. As far as your problem, if everything looks ok, try to trip it manually or if the belt is ok,but not tight, take a screwdriver and hold some tension on the belt that drives the pump to see if you can get the arms to return home. I'm sure you checked the oil in the pump. those balers have a couple quirks that you have to learn, then they work great. | |
|
535 Baler won't cycle twine arms
