Appomattox/Fredericksburg, VA | Sounds like the valve. My 7930 is doing the same thing right now. Of course Deere had a fix as fail PIP that left my tractor out by 2 serial numbers and now the PIP is cancelled. Just my luck. I think you can get just the electrical part of the valve (on the 7930 anyways) and not have to buy the complete valve. I haven't had a chance to dive on mine, I've just been clearing the code. Might check the harness going to the WAS as they have given problems in the past. Ask your dealer to reference DTAC solution 70749. They can update the software so you won't have to cycle power to get autotrac back. That will save you a little headache until you can get it fixed. |