|
| Couple options you could do. Turn your sprayer/spreader into ISO using Dickey-john modules and harnessing. Then everything would work thru the VT on the X-30. If you already have the tractor ECU for the planter in the cab, then this would be the easiest. When you change implements, you back up to it, plug in, it loads on ISO and away you go.
What cable do you have going to the back of the X-30? Topcon offers a couple different cables and we need to make sure you have the one that has a duestch plug to connect ASC-10s. AGCO eliminated that plug on their harnessing because they don't support the ASC-10. That is why I was asking about factory wiring. | |
|
Topcon experts
