|
Leeds, North Dakota | http://www.messicks.com/ Bill, go to there website, type in your tractor and go to hydraulic section, there are a lot of orings in valves and shims between each valve. Yes stack needs to be removed, its heavy/ akward, you really need to pay attension with so many different orings, need a big clean bench, need to mark them 1 thru 4. As mentioned load check could be causing issues, but normally its the primary and secondary orings that go to heck, if your not fairly mechanically handy would suggest taking it to some one that is, Scott. | |
|
new holland 8970 remote rebuild
