|
Leeds, North Dakota | Tim, IF levers are in neutral, not sticking, I think you have a issue with standbye pressure valve, possibly sticking making pump being stroked, three remotes or four? mega flow? # 13 is a load check, as far as break down for seal #'s need to look at valve break down, there are a lot of orings in valve body. You need to print off breakdown, keep orings separate, there are shims between valve slices, also if its mega flow there is a disc, that needs to be installed correctly, # 3 slice I think, tell me more, I have worked on a few of these ladies, valve stack is heavy, give me a call, I will look up #'s for you, Scott. | |
|
New Holland 8770 Hydraulic Remote Rebuild Process
