roaming | sioux54 - 3/13/2014 21:39
Any of you guys know how to change the baud rate on a Pro 600? From what I understand 38,400 is the default rate, but I need to be at a rate of 9600 to allow my other two controllers to communicate with one another. Thanks.
You can't change it, but you don't need to. It will autodetect the incoming baud rate, and anything from 4800 to 38k4 is acceptable. Just feed it 9600 and you should be good to go. NMEA strings GGA and VTG, 1hz or 5hz (maybe 10hz depending on your software version). |