NW Central Iowa (Fort Dodge) | The EZ Guide 500 has a built in receiver and the white "globe" on top just uses a coax to feed the 500 the antenna signal
- kinda like a radio in your truck, the lightbar is the radio in the dash and with out the ouside antenna the radio doesn't work.
So to get GPS "NEMA strings out of the Ez guide 500 you will need
4000325-10 - Cable - PC Null Modem, 10ft. (EZ-Guide Plus/500) $40.00
This will plug into the back of the 500 - the 9 pin port and hook into the GPS serial connector on the InSight harness
DONE
If there is no EZ Steer you will need 3 cables to move the main components from each tractor
- Coax of your choice about $60-70
- 4001363 - Power cable $120
- 4000325-10 - Cable - PC Null Modem, 10ft. (EZ-Guide Plus/500) $40.00 (same as before if you want 2 complete sets.)
- RAM Mount just like InSights/Vision |