Near Intersection of I-35 & I-90 Southern Mn. | On a post below I indicated that I thought it was now possible to switch application products within a field and not lose the coverage map so autoswath would work properly if a different product were applied to the ends etc. This was based on information from a salesmen.
Another post below indicated that this is not yet possible. Today I confirmed that it has not been changed. It does work to switch varieties midfield and not lose the coverage map but not so with application products. In reading the update documentation this was not listed as a change. In running an updated Integra and a simulator we started applying a product and the map showed as expected. We stopped and switched products, a new map was created without showing any coverage of the previous product so this feature has not been changed.
It appears that the workaround of using a generic name and not changing it midfield is still the best option for retaining the coverage map for Autoswath.
Edited by tedbear 3/14/2014 07:29
|
Integra firmware upgrade- product switching
