|
North/Central Kentucky | The screen showed me on a line. What I don't remember is if it was showing overlap from the last pass. I also don't remember if it showed 0 inches left/right.
I just kept thinking that this thing only knew one thing. Drive a straight line that is calculated from the master A/B line based on the implement width. And the line it was driving wasn't one of them.
I do not recall the firmware. Seems like the updates on the latest firmware didn't give me any reason to update.
And I assumed that since I bought this unit new, the firmware would be very recent. Perhaps a bad assumption.
I do have the latest release. I see no harm in loading it. I'll do that before I test again today. | |
|
First test with CFX-750 and EZ-Pilot - confused...
