|
| When you are trying to raise it with the #1 remote and it stops raising, try moving each of the other remotes back and forth. If one of those makes it work, you have bad orings in the load check on that remote. If that doesn't do it, then refer to Scott's advice.
If it is a bad load check, unscrew the plug with a screwdriver slot in it on the side of the remote stack. Don't lose the ball! Replace the oring on that little load check that you took out.
To unhook the remotes: Release lock levers. Push the implement hose all the way in, then grab the hose on the tractor side of the coupler and hold it in place, then pull the implement hose out. Kind of awkward, but quick once you get used to it. | |
|