|
South central MN | If it has a raven controller on it you can use a raven replacement kit. That will use all the raven wiring and tie it into the can of the tractor. Where the module ties in depending on the tractor or how you want to do it. You can email me if you want more info. Then you need the accucontrol unlock, which by your wording sounds like you have. I have a few out ant they work very well. The other option would be the raven iso node which would mount on the bar then plug into the iso plug on the tractor. Then you would need the task controller unlock, if you want to map or do vr. | |
|
|
Case IH Pro 700, 5300 NH3 bar
