Near Intersection of I-35 & I-90 Southern Mn. | B Leu - 3/7/2014 14:24
Does anyone know of a good hydralic pressure switch that can be used to control coverage logging on a EZGuide 500?
I know that a hydraulic pressure switch can be used to start/stop mapping based on the status of the PTO on some "red" tractors. I don't remember the pressure trigger point rating of this switch. Seems to me the switch that was used on the red tractors actually came from Deere but other sources could work as well.
It would probably be best to have the pressure switch trigger a relay that connects the appropriate wires on the EZ-Guide. The relay may not be absolutely necessary but it is the safer approach. |
Pressure switch for coverage logging
