|
| Yes, you can use the 15 hr demo of surface water pro on the display and run it in survey mode while planting, doing tillage work or whatever operation that you would travel across the entire field. The survey mode basically just runs in the background. There are 2 different modes either time or distance. This will create a elevation map for you. Just export that data off the screen and unload it into Apex, or whatever software you're using. Have you tried just using a regular elevation map from any sort of documentation task? If you use apex you can use GSDNet with that survey layer and it will create a depression map, drainage map, and digital elevation map. SMS will also do this for you with just a regular elevation layer from any documentation task. Hope that helps.
| |
|
Can I survey my fields with a 2630 and RTK?
