|
Missouri | Kinze parts:
Module Mount Bracket, PN: GD18013 x1
Module Mount Support, PN: GD19295 x1
Module Mount Cover, PN: GA12563 x1
ISOBUS Implement Cable, 12 row, PN: GA15881 x1
Terminating Bias Circuit GD22968 x1
CAN Jumper Cable GA15883 x1
Y-splitter, 2 way; GD22975 x2
Terminating Resistor, 2-Way DTM GD22974 x2
ISOBUS PMM, GA15290 x1
ISOBUS PCM, GA15288 x1
PCM Cable, GA15882 x 1
You may or many not need Implement Switch Kit, PN G1K528 x1. If you're present switch assembly closed the connection when the planter is "DOWN", opens the circuit when the planter is "UP", and ends in a three pin weatherpack shroud with the wires in question pinned to terminals A & B, then you can reuse your existing switch.
You will then need Ag Leader part#: 4001086-3 . This is the cable that will go from the clutch output connector of the PCM module, to the individual air valve boxes. It is only 3 feet long, so extension cables are needed for air valve boxes further than 3 feet from the PCM (likely to be all of them). 4001086-3 is the Ag Leader part number for their shortest extension cable. It is 16 feet long, which should be more than plenty. Alternatively, if you are equipped to put weatherpack ends on cable, you can make your own, exact right length, extension cables., and probably cheaper as well.. | |
|
Kinze isobus kit
