AgTalk Home
AgTalk Home
Search Forums | Classifieds (50) | Skins | Language
You are logged in as a guest. ( logon | register )

Row Clutches
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
KMech
Posted 3/1/2014 15:39 (#3725287 - in reply to #3723778)
Subject: RE: Row Clutches


Missouri
Ag Leader parts:
Ag Leader Surestop clutches, PN:4001624 x12
Ag Leader Row unit hardware kit, PN: 4100568 x3
Ag Leader toolbar harness kit, PN:4100590 x1
Ag Leader Section Adapter harness, PN: 4001743 x1

Kinze parts:
Module Mount Bracket, PN: GD18013 x1
Module Mount Support, PN: GD19295 x1
Module Mount Cover, PN: GA12563 x1
Implement Switch Kit, PN G1K528 x1
ISOBUS Implement Cable, 12 row, PN: GA15881 x1
Terminating Bias Circuit GD22968 x1
CAN Jumper Cable GA15883 x1
Y-splitter, 2 way; GD22975 x2
Terminating Resistor, 2-Way DTM GD22974 x2
Adapter clutch HS driver Cable, GA17200 x 12
ISOBUS PMM, GA15290 x1
ISOBUS PCM, GA15288 x1
PCM Cable, GA15882 x 1

The Ag Leader parts are packaged in a kit designed for retrofit installation, complete with instructions. The Kinze pieces are just individual parts over the parts counter, a reasonable degree of mechanical aptitude is necessary to figure out the installation details. If you choose to do it, I can talk you through it.
Pricing may vary, and you'll need to check that with the dealer you choose to use.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)