|
lowersaxony, germany | Hello together
this is my first post here and I will ask you to be carefull with my englisch, I`m from germany.
FmX and ISO:
I have a FmX with ISO and VRC, my tractor (MB-Trac 1500) have the Müller Elektronik (ME) Tractor ECU and my sprayer have (or has??) ME ISO Bus with the ME BasicTop (ME BT) Terminal with SectionControl and TrackLeader II, but without a GPS Receiver.
Now I tried to connect the FmX to the ISO Bus, build a adapter for ME 9Pin serial to CPC/InCab from FmX ..... but no connection ....
From the FmX Deutsch to CPC/InCab there are only 2 Pins on the Deutsch connector to 4 pins on the CPC (1 to 2,3; 12 to 4,5)
When I connect the ME BT to TECU and switch it on, i can hear a "Klack" of the relay ..... when I take the FmX nothing .....
So, this are my experiences ....
Software 8.0: where can I find the actual trimble? The website don`t have the software since one year ....
EDIT: mistakes and the last sentence
Edited by Sugar-Beet 2/23/2014 14:06
| |
|
FM-1000 ISO capabilities?
