roaming | Dmarrs1 - 2/22/2014 07:17
I just seen 2 round ports in the bottom of the 700, idk about the markIII?
The Pro 700 has one round BNC connector on the bottom for a video input. The other connector on the bottom is an RJ45 (Ethernet) connector that is not used.
Connection to 3rd-party controllers is done via one of two RS232 ports on the Pro 700; both are on the back of the display; one is a DE9 connector, and the other is integrated into the 26-pin Amp connector.
But your bigger issue, even if you can get the two physically connected, is that the Pro 700 does not support MidTech controllers. Unless the MidTech happens to use the same communication protocols as a Raven, Rawson, Flexicoil, or Hardi serial rate controller, the Pro 700 won't be able to do anything with it. |
Pro 700 connection to new leader markIII
