|
Wi | I would skip the flashers all together and put some bright class 1 strobes on it then leave the flashers off. Wire in a relay to cut the strobes off when you use a turn signal if you want better visibility for the signal. You eliminate the confusion people often have with the flashers. The flashers often are not very bright and are mind numbing. a beacon has good range, but I prefer strobes. Make sure you mount them so they don't annoy you. I put them on the mirrors, and then on the wide flashers with a deflector so they dont flash in the cab. works great. I used Whelen M4s on the Fendt, a little pricier but very bright and high quality. They are surface mount so they only disturb the area a little bit and are easy to quick hook up. I also replace the poor tape that Ag equipment uses with c2 DOT red/white tape.
Here's a video of them
http://www.youtube.com/watch?v=p5tJQwIbagU&list=UUcM1ZYgmn0fWkUMFrE...
 | |
|
John Deere 7810 Warning Lights
