|
| You need both fiq switchboxes, raven replacement kit, trucount adapter harness. One weather pac connector to plug into the trucount harness. Wire this weather pac plug up to 2 standard 5 pin relays (may different ones out there that can be used). Connect the wires from the relay to the back side of the switches in the swing box in the cab. All of this can be installed in the swing box leaving only the weather pac connector hanging out of the swing box to connect up to the fiq. All harnessing will be in the cab, clean and simple set up. Really nice setup for a bean planter also on the cheap. With the raven replacement you will also have to pin in two connection at the fiq box for a implement switch and run a set of wires to the planter and mount a switch for this. Or you could run the master switch on the fiq box but i wouldnt recomend it. Have done this setup many times and it works very well. Good luck. | |
|
Kinze half width section control with field iq
