Near Intersection of I-35 & I-90 Southern Mn. | You should be able to split the radar output from the 750 to feed both devices. For some earlier Trimbles, they recommended using a pulse amplifier inline to boost the signal but I have not needed to use one on the 750 but I am only feeding one device.
I have split real radar signals several times in different situations without the need of any type of amplifier. I remember that some of the third party splitters had amplifiers as they felt it was necessary. I think you will be fine.
Don't forget that you must use the menu system on the 750 to inform it that you want radar out. You will have the option of choosing the Hz rate for the output. As I recall I used a number around 57 Hz or so. The output was then quite close to the real radar gun that I had been using. You may have to experiment around with the settings in the 750 and your other devices to get them all to show the same correct speed. |
Trimble 750 Question
