|
Iowa | New 8360R with 2630 and SF3000 on SF1.
Dealer installed a JD Rate Controller on our Houle wagon this winter and having some issues.
Trying to figure out if there is a better way to set everything up. This is the first Rate Controller we have used on the farm.
Problem 1: We have to program in our swath width and implement width in every time we cycle power on the tractor.
Problem 2: We are unable to select an implement on the GS3 screen so we are unable to program in our offsets to accurately map where the product is being placed.
Problem 3: In the Rate Controller, what type of implement should be selected? Currently it is set up as a self-propelled sprayer.
Recording Source:
We use a foot switch to turn on/off recording. We have a PTO pump but we will occasionally let the pump run at the end of the load to clean out as much product as possible.
I am looking for any input as to how I can fix the above problems and set this up the best way possible.
TIA.
| |
|