Between Omaha and Des Moines, 7 miles South of I80 | | The combined load from both main/auxiliary valves cannot exceed 4 amps. |
Thanks for the info. I'm actually not using those outer solenoids, to operate "fence row nozzles" (I read about those last night, in my Intregra booklet) I actually want them to operate as part of the normal boom or it will be its own section, BUT they will just be single nozzles (two on each side, at end of boom). I realize I must supply them with their own spray solution plumbing, too. That info, about max of 4 amps, does help, so I know I need relays, for each solenoids. When I googled, 4003049 and got a .pdf file; it mentioned about a "power polarity reversing cable" = I don't believe I need that. Even the Teejet 450 series ball valves, have a reversing mechanism inside them, so they operate with a simple 12 VDC either "hot, or open" on the switched 12 VDC wire. (SPST) http://www.teejet.com/english/home/products/spray-products/valves-and-manifolds/manifold-valves/450-series-manifold-/450-series-shutoff-manifold.aspx
Attachments
----------------
 teejet 450 series valve wiring.xps (84KB - 863 downloads)
|
Ag Leader Liquid Control questions
