|
Central Ia | They control the switched power. If you are looking for using solenoids for the fence row nozzles you would use a separate harness. You would also need a 4003049 harness and 4002976-6 for aux fence rows solenoids. The 049 cable uses relays and convert the signal to a 2 wire (-) and (+) for the use of solenoids. The 4003049 would get pinned into the aux 12 pin deutsch plug the goes into the aux port of the liquid module. The pressure transducer cable also gets plugged into the aux port of the liquid module. Only thing you would need is the round 3 pin metripack and sockets that is used to connect to pressure transducer and you could make your own cable and pin into aux port. | |
|