|
Western Australia | Thanks PrecisionNE, it sounds like I will also need to get a servo or regulating valve . My existing Farmscan servo valve has limitations in the amount of liters per hectare it can apply. Its a trade off between getting the right amount of flow and not having too much back pressure when on aggitate. This lead to me damaging the motor on my Hypro pump.Expensive exercise that turned out to be. Will any manual section control "talk' to 2600 monitor? My manual section or solonoid controls are connected to my Farmscan controller. Hope this makes sense as most of you are unfamiliar with this equipment. Thank you. | |
|
John Deere rate controller.
