Viewing a thread - NG to LP Gas Jet sizes

Forums | Classifieds (116) | Skins | Language

You are logged in as a guest. ( logon | register )

NG to LP Gas Jet sizes Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Ernie

Posted 4/23/2008 12:16 (#363747)
Subject: NG to LP Gas Jet sizes

North End I-15

Are LP jets a smaller size than NG ?

Ed Boysun

Posted 4/23/2008 12:27 (#363751 - in reply to #363747)
Subject: RE: NG to LP Gas Jet sizes

Agent Orange: Friendly fire that keeps on burning.

Yes.

A drop of solder and wire drill works. A bit of braze and wire drill does too. I've even seen an appropriately sized punch used to flatten the brass and shrink the hole.

Ernie

Posted 4/23/2008 12:49 (#363759 - in reply to #363751)
Subject: Thanks Ed

North End I-15

Dealer is suposed to make this right , I want to check the jets being replaced. Two service calls and the kid still hasn't got a clue. I read the data place that gave the jet size for NG , pulled one and it was the same as data plate. Called dealer again and requested they FIX it this time.
I always used gun burner stove oil so know nothing of Propane or NG . The web site for the manufacture had no information on jet sizes .

I do have all the number and letter sized drills for jet work , I keep them hidden from the neighbors :>)

Rasor Farms

Posted 4/23/2008 14:17 (#363787 - in reply to #363759)
Subject: What make and model furnace?

southeastern ohio

I might be able to tell you what drill size it should be.
Tim

Ernie

Posted 4/23/2008 16:12 (#363816 - in reply to #363787)
Subject: Advanced Distributor Products

North End I-15

Model # CUHN -45A-4 Current jets are .0745 listed as the standard NG size.
Want to be able to check when they come to replace to make sure they are the correct size. It is a positive exhaust burner type heater . 3 tubes . 80 % effeciency .

Jump to page : 1
Now viewing page 1 [50 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)