|
NW IL | Jay,
I must apologize - I made a mistake in my original post. The auxiliary cable 4002226-15 does NOT by default put 12 volts to DB9. The table that I posted is for a modified 4002226-15 cable. The factory cable has all the pins as shown, expect for DB9 both serial A and B have only TX, RX, and Ground set up by default (no 12v from factory).
To power a bluetooth serial adapter (I'm guessing that is what you may be interested in?), you need to take the 12 volt supply from the factory 12 pin wire, splice it and connect the line to DB9 on pin 8 to supply power via DB9.
That's what I get for posting after midnight. Should have just went to bed and responded in the morning. :) I edited my first post so hopefully people do not get confused when they read it.
Edited by swenzel 1/22/2014 23:34
| |
|
Paradyme Auxiliary Port Pinout
