|
| We have a problem with swath control when backing into corners. ( We have lots of corners). When spraying up to a corner in auto swath we turn our master off, stop, and then turn and back into corner. When we take off only half or so of the boom needs to come on.
The problem is when we take off again the map is backwards like you are pushing the boom making the opposite side of the booms come on. After you go 3 or 4 hundred feet the map will flip back correctly and every thing will work fine. After leaving a big skip!
We did not have this problem till we updated the software version this spring as far as we know. Our dealer says there is no going back to a previous software version.
Any ideas?
PS We also have a Vision on our planter and the swath control does not work correctly after backing up also.
Edited by WLR 4/20/2008 17:08
| |
|
Insight Swath Control
