|
| When you are running SF1 or SF2 it is recommended setup on 2 rows. When coming into a point row with less signal if you are on individual rows, once that row comes within a certain point of where it thinks it has already been planted (could be 6" off with drift) then that individual row will shutoff leaving you with an extra large gap. The alternative being on 2 rows you will over plant just a bit until row 1 of 2 is through the point.
Just a recommendation, all depends on preference on what is adequate. Clutch on-off times are the most important. | |
|
Point Row Clutches, Green Star Rate Controller
