|
| If you do not already have the hydraulic servo valve and cost is a major issue, you need to consider the system cost. A PWM valve can be had for less than $400 from Northern Tool. http://www.northerntool.com/shop/tools/category_hydraulics+hydr... I priced a Dickey-john 30 gpm servo valve about 15 years age. I think is was $2500 then. You should be able to buy a Land Manager or Land Manager SE and the conversion harness for less than $2100. You will need a valve driver, cables, and speed sensor for either system.
Dickey-john's phone support is good. Ask them about your specific 100's capabilities and what is needed. 800-637-3302
| |
|