|
| Torn-There are some assists from last spring on this topic. I run red tractors with green drills and had a total mess with this last spring. We finally figured out that this is a voltage issue at start up, especially when the tractor is cold. It seems that when the tractor uses voltage for it's cold weather start process, only the blockage will show up first. If the operator lets the tractor run for a couple minutes, gets out and unplugs the ISO and then plugs it back in after 10 seconds, the rest of the drill will show up. You will have to clear two errors and then it should work just fine. | |
|
Pro700 ISO Communication with JD Seeder
