|
NW Illinois | I'm going to put up a SNB 900 as a Repeater on top of my 60' Silo, and would like to keep the SNB 900 close to the ground so when not needed I can remove it and store in the Shop out of the Lightning and Weather.
I have enough 1/2" (I think its PL259??) coax from the old CB days, so I don't need to buy any. I'm guessing would be about 75' of Coax used.
My Question is, Will I loose wattage, power, distance or whatever with this length of Coax?
The Radios were used that I bought and came with a 5' Fiberglass Antenna, I've only see the Whip or Shot Glass type before is this the best choice for my use? TIA. Dave
Here's the Antenna info.
OMNI-DIRECTIONAL ANTENNAS
FG9026 (902 - 928 MHz)
Normalized to 6dBd
FEATURES
? High Performance
? Easy installation /w
optional FM2
? Special UV treated radome,
resists sun damage
? N Female industry standard
connector
? 100% tested on a network
analyzer
Elevation Pattern (Y, Z or H-plane)
MECHANICAL SPECIFICATIONS
Height: 61”
Diameter: 1.310”
Weight: 0.5 lb
Rated Wind Velocity: 125mph (210kph)
Rated Wind Velocity (with 0.5” radial ice)
85mph (137kph)
Lateral Thrust @ 125mph WIND VELOCITY
57 lbs. (26kg)
Wind Resistance in Sq. Feet: 0.5549
Mounting Information: FM2 Mounting Kit
(Sold separately)
ELECTRICAL SPECIFICATIONS
Frequency Range: 902 - 928 MHz
VSWR: < 1.5:1 Max
Nominal Gain: 6dBd
Maximum Power: 100 W
Nominal Impedance: 50O
Polarization: Vertical
Pattern: Omni-Directional
Half-Power Beamwidth: 30° x 360°
(Elevation° x Azimuth°)
Coaxial Cable Length & Type: None
Termination: N-Female connector
Lightning Protection: Lightning Arrestor
LABH350NN
(Sold Separately)
2000-205 Bloomingdale Road • Glendale Heights, Illinois 60139 U.S.A. • Web Site: Http://www.antenex.com
630-351-9007 • Fax: 630-351-9009 • Order line: 800-323-3757
Page 1 of 1 Confidential Information
N:\Antenex\Engineering Dept\Web Data\Product Information by Family\Fiberglass Omnidirectional\Spec\FG9026_Spec\FG9026_Spec.doc | |
|
Repeater Coax
