Missouri | AG#1 - 1/7/2014 19:31
Neither the planter or tractor are ISO, and I have a JD sprayer and another tractor with the JD gs2
The clutches will need a control system. There is Ag Leader's clutch control module, but it ONLY works with Ag Leader dispays.
There are Kinze's ISOBUS modules. It works with any compliant ISOBUS display with task controller support. A Pro 700 should meet this requirement.
There may be a control system that is native to the Pro 700 which the clutches could be hooked up to with the appropriate adapter harness, but I am not aware of it, and even if there is, I have never heard of a system that could also read the sensors, except for the PMM in and Ag Leader, or ISOBUS system. |