|
Missouri | I've never built a system with multiple liquid modules, so my knowledge of that configuration is textbook only, but from what I understand, yes.
It would be a long way to go about it, but if one was determined, it may be possible to hook the second rank of row unit clutches up to a liquid module. Hurdles involved with this would be needing multiproduct, needing highly custom wiring, an absurdly unorthodox configuration programming on the display, and the fact that liquid control module applies power to turn a boom section on, whereas clutches require power to be turned "off". This could be corrected with the right kind of relays tied into the harness. Perhaps a boom valve relay module could be repurposed for this task. | |
|
What do I need
